CYBEX 700T Manual de Serviço descarregar pdf (Página 81)

Cybex 700T Treadmill Owner’s Manual

Page 7-18

SHIFT backs you up one step in the diagnostics test menu.

d9: Number of Starts

This test displays the total accumulated distance to date, in miles (km), that the treadmill has

been used.

The diagnostic test number d9 is displayed in the left control panel window. The right control

panel window displays the number of times that the treadmill has been started if 9,999 or

less. As the number increases beyond 10,000, the right window resets (rolls over) to 0 and

starts counting up all over again. The left window in this case will show a “2” in its right digit

to reflect that the treadmill is counting its second set of 10,000 miles.

For example:

d9 2 START 5444

This display indicates 15,444 starts.

Active keys during this test (hold keys for two seconds):

START/ENTER will advance you to the next diagnostic test.

STOP will exit and return you to the mode you were in before entering Diagnostic Tests.

SHIFT backs you up one step in the diagnostics test menu.

d10: Speed Sensor

This test confirms that the speed sensor is being detected and processed by the speed

sensor. During this test, if the motor is running, you should see the numbers on the display

constantly increasing, counting the number of pulses generated by the speed sensor. As the

speed of the motor is increased the numbers will increment faster.

This test displays the diagnostic test number d10 in the left control panel window. The right

control panel window displays the speed sensor count.

For example:

d10 2698

Active keys during this test (hold keys for two seconds):

START/ENTER will advance you to the next diagnostic test.

STOP will exit and return you to the mode you were in before entering Diagnostic Tests.

SHIFT backs you up one step in the diagnostics test menu.

d11: Error Log

This test will allow you to view the last nine error codes the treadmill has generated. In this

test, the left window displays the diagnostic test number d11 followed by a flashing digit

representing the error log sequence number (1 through 9). Number 1 represents the most

recent error code, 2 the next most recent, up to 9, the oldest error code. The right window

displays the error code number (1 through 7, see list below) associated with the error code

1 2 ... 76 77 78 79 80 81 82 83 84 85 86 ... 89 90

Sem comentários

CYBEX 700T Manual de Serviço Página 81