CYBEX 400T Guia do Utilizador descarregar pdf (Página 19)

Basic Operations

Your AutoView 400 may be operated in a non-secure (no password

required) or secure (password required) mode. All units ship defaulted to

the non-secure mode. For information on implementing password security,

see the “Administrator Functions” section of chapter 4.

Computers may be powered-up one-at-a-time or all at once. No operator

intervention is required during booting. As the system stabilizes, the

green LED over each channel will light, indicating that the attached

computer is powered on. A computer may now be selected via the on-

screen display menu or, if you are in non-secure mode, channel push-

buttons, the Scan button or keyboard hot-key sequence. The amber LED

will light at the active computer.

The Scan push-button has one LED over it. Press the button momentarily

to switch to the next computer in sequence. The LED will turn amber

briefly during the channel switch. Press and hold the button for one

second to initiate channel scanning. The LED will turn green while you are

in scan mode.

There is one status LED. The LED lights red if an internal failure occurs.

The LED will blink green for several seconds during power-up while the

system performs a self-diagnostic. After initialization, the LED remains

green during normal operation and blinks only when you are in

Command Mode.

Overview

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 55 56

Sem comentários

CYBEX 400T Guia do Utilizador Página 19